Linksys wireless network setup is very easy and you can do it manually in less time. You don’t need to run any installation CD or any other software for Linksys wireless network setup. Simply connect your modem and router, and then connect your Linksys wireless router to the computer and you can set up the wireless network of your Linksys router. Linksys router comes with easy and responsive web-based interface, from where you can manage configurations of your Linksys wireless router.
Now, we will explain you steps for Linksys wireless network setup:
- Make sure modem is working properly:
First, make sure that the modem provided by your Internet Service Provider is working. Your computer should be accessing the Internet directly through the modem. In some cases, you won’t be able to access the Internet directly. You will need PPPoE username and password to access Internet manually.
- The connection between Linksys wireless router – modem – computer:
Now, connect your Linksys wireless router with your modem using Ethernet cable. Simply, put the one end of an Ethernet cable into the Linksys wireless router, and another end into the modem. Using another Ethernet cable connects your Linksys wireless router with the computer.
- Open Linksys wireless network setup page:
Look for the default IP address of your Linksys wireless router on the back of it. You will need this IP for Linksys wireless network setup login. There will be a wireless network settings card on the back of your Linksys router with default IP, login credentials, the network name (SSID), and network key (passphrase) written over it.
Now, open a web browser on your computer and type the default IP address into the address bar and click Go. Enter the username and password into the login fields if prompted and click Login.
- Changing Linksys wireless network settings:
For Linksys wireless network setup, navigate to the wireless tab on the Linksys wireless network setup page. Now, set up a Network Name (SSID) and a Network Key (Passphrase) for your Linksys wireless router. Network Name is also known as WEP/WPA key. It’s nothing but a password for your wireless network. WEP/WPA key keeps your wireless network secure from any unauthorized device. As many unauthorized devices come in the range of your wireless network, which causes misuse of your Internet connection.
- Connecting wifi capable devices:
Now try to connect your Wifi capable devices with your wireless network. Simply scan for active wireless networks around you. Select your Network Name (SSID) from the list and enter the WEP/WPA key to connect to it.
Since your Linksys wireless network setup is now completed successfully, you can modify your wireless network settings anytime later.
In case your wireless network settings are not configured properly or you are facing some issue while attempting to configure it. Don’t worry; simply reset your Linksys wireless router to its default settings. Press the reset button with a paperclip and hold it for few seconds. Now your Linksys router will reboot, and you can configure wireless network settings again as mentioned above.